Resolving My Keurig Won’t Turn On Error: The Comprehensive Guide

For coffee lovers, a Keurig machine is a lifesaver. It provides the convenience of making your perfect cup of coffee at home without leaving the house. However, there are times when the Keurig won’t turn on, which can be frustrating for those who depend on their morning cup of Joe. Some people may think this is the end of the road for their beloved coffee maker, but there are ways to troubleshoot the problem. In this article, we will explore the possible reasons why a Keurig won’t turn on and what you can do to fix it.

Why My Keurig Won’t Turn On?

Why My Keurig Won't Turn On

Some of the possible causes of your Keurig coffee maker won’t turn on:

Is The Keurig Machine Plugged In?

The first step in troubleshooting a Keurig that won’t turn on is to check if it is plugged into a power outlet. This may sound simple, but sometimes it’s the most obvious thing we overlook.

Is The Power Button Pressed Down For Long Enough?

If the Keurig is plugged in but won’t turn on, the power button may not be held down long enough.

Is The Circuit Breaker Tripped?

Sometimes a Keurig might not turn on because the circuit breaker in your house tripped. Check if any other appliances or lights are also not working.

Is The Water Tank Seated Correctly?

If the Keurig still doesn’t turn on, there could be an issue with the water tank. Besides, the machine has a sensor that detects the presence of water in the reservoir. The machine won’t turn on if the sensor cannot detect any water.

Is The Outlet Faulty?

If the Keurig is still not responding, try plugging it into a different outlet to eliminate a faulty outlet as a cause.

Clogged Needles

Another possible cause of a Keurig not turning on is clogged needles. Over time, coffee grounds and debris can accumulate in the needles that puncture the coffee pods, preventing water from flowing through. When this happens, the machine’s pump won’t work, and the Keurig won’t turn on.

Keurig Won’t Turn On After Running Without Water

Keurig Won't Turn On After Running Without Water

There are a few possible reasons if a Keurig brewer won’t turn on after being used without water. The most common cause is that the machine is unplugged or the water reservoir is empty. Other problems could be a faulty power button or a technical issue.

To fix this, the user can try holding the power button down for 10 seconds or flip the power switch. On the Keurig Plus/Keurig 2.0 Series, they can tap the power icon on display. If this does not work, unplugging the machine and leaving it for a few minutes before plugging it back in may help. Finally, the user can try resetting the device by leaving it unplugged without the water reservoir for a few minutes, turning the power on, and then replacing the water.

Keurig Won’t Turn On After Running Descale

There could be a simple explanation if you are experiencing trouble with your Keurig turning on after running a descale cycle. When the thermal switch on the heating component becomes tripped, the machine will not turn on. However, with a little bit of knowledge and effort, this issue can be resolved. Some Keurig owners may attempt to disassemble their machine to manually push the disk on the switch back to its normal position. However, for those who would rather not take the risk, the best course of action is to reset the Keurig by unplugging it or following the suggested steps provided in the user manual.

If none of these solutions work, checking if the brewer powers on using a different kitchen outlet are recommended, ensuring the power button is pushed or holding the power button down for 10 seconds.

Keurig Won’t Turn On After Power Outage

One common issue is a problem with the power outlet or a malfunction in the machine itself. Check to make sure that the brewer is plugged securely, and try plugging it into a different outlet. Another cause of the problem could be a short circuit or a power surge affecting the fuse settings on your machine. In this case, resetting the fuse box or seeking professional help may be necessary.

How To Fix Keurig Not Turning On

Check The Power Cord

First, check if the brewer powers on using a different kitchen outlet. Ensure that the power button is pushed to turn the brewer on. If it doesn’t turn on, unplug the machine and check the power cord to see if there are any frayed or broken wires and if so, replace it. Try plugging the machine into a different outlet or check the power cord for damage or defects. If the cord is damaged, the Keurig won’t work until you replace it with a new one. Checking and fixing the power cord is an easy fix that can save you time and money and allow you to enjoy your freshly brewed coffee again.

Reset The Machine

Basic Resetting (for Keurig 1.0 Machine)

To reset a Keurig 1.0 machine, there are several simple steps. Firstly, unplug it from the wall and allow it to rest for a moment. Then, press any button to turn it back on. Hold down the power button for 10 seconds, or flip the power switch if there isn’t a button.

Another method is to hold down the reset button for 10-15 seconds before waiting for the machine to reset itself. Once done, turn off the brewer and plug it in. To reset the brewing cycle, the K-cup holder can be unlocked and closed, and the machine can be unplugged for up to 5 minutes. By following these simple steps, the Keurig 1.0 machine can be quickly and effectively reset.

Basic Resetting (for Keurig 2.0 Machine)

The first thing to try is opening and closing the K-Cup lever. If that doesn’t work, you can unplug the machine or descale it for several hours. If those methods don’t work, you can try unlocking and closing the K-cup holder by unplugging the unit for up to 5 minutes while resetting the brew cycle.

Additionally, some models have a reset button, which can be found on the underside of the brewer near the power cord and/or filter basket. Just wait for the brewer to heat before selecting the brew size. If it still doesn’t work, try unplugging it for 30 seconds and then plugging it back in. Remember not to cut or remove the third (ground) prong on the power cord, and your Keurig 2.0 machine will run smoothly in no time!

Check The Control Board

To troubleshoot this, the first step is to check if the brewer powers on using a different kitchen outlet and ensure the power button is pushed to turn the brewer on. If it still won’t turn on, try plugging the machine into a different outlet, or check the power cord for damage.

If that doesn’t work, it may be time to take a closer look at the control board and see if any components need to be replaced. With a little bit of troubleshooting and some basic maintenance, your Keurig should be up and running again in no time.

Check The Heating Element

If someone is experiencing a problem with their Keurig coffee maker not turning on, there may be an issue with the heating element. To fix this, the first step is to ensure that all liquids and grounds have been emptied from the appliance before turning it over to remove the bottom panel. Once the panel is removed, check the heating element to see if it is broken or damaged. If it is, it will need to be replaced.

However, if it appears to be in good condition, it may just need to be cleaned. Sometimes, dried coffee, dust, or dirt can get trapped in the heating element, causing it to malfunction. Use a soft-bristle brush to clean the heating element and reassemble the machine. This should fix the problem and allow the Keurig to turn on normally.

Check the Switch

If you’re facing the issue of your Keurig not turning on, there are a few things you can do to troubleshoot the problem. One of the easiest steps is ensuring the brewer switch is turned on. Simply check that the switch is in the “On” position before pressing the power button. This may seem like a basic step, but it’s easy to overlook, especially if you haven’t used your Keurig in a while.

Check For Clogs

If your Keurig is not turning on, don’t panic – there may be a simple solution to the problem. One common cause of a malfunctioning Keurig is clogs in the machine, preventing water from flowing properly and stopping the unit from operating altogether. To fix this issue, the user should check for clogs by removing the water reservoir and looking for any obstructions in the water line. If a clog is found, they can use a paperclip or similar tool to carefully clear the debris. Additionally, they should check and clean the hose/valve at the bottom of the tank and the machine where the tank goes, as this valve can also become clogged and cause issues.

Check the Thermostat

The thermostat is responsible for regulating the temperature in your Keurig. If the thermostat is not functioning correctly, your Keurig will not turn on. To check the thermostat, you must first unplug your Keurig from the power outlet. Then, remove the water reservoir and the K-cup holder. Next, use a screwdriver to remove the base plate of your Keurig. You should be able to see the thermostat at the bottom of the Keurig.

If the heating element or the thermostat is faulty, you must replace it. You can purchase these parts online or contact Keurig customer support for assistance. However, before you replace any parts, ensure you have unplugged your Keurig from the power outlet and have allowed it to cool down.

Check The Power Supply

The power supply is the most common reason your Keurig may not turn on. If the power supply is faulty or not providing enough power, your Keurig won’t function correctly. To check the power supply, you’ll need to use a multimeter to test the voltage output of the power supply. If the voltage output is too low, you must replace the power supply.

Broken Pump

The Keurig won’t turn on if the pump is broken or malfunctioning. In this situation, you’ll need to replace the pump. However, before replacing the pump, ensure there are no clogs or blockages in the machine’s tubes and valves.

Read more:

Why Does My Keurig Keep Shutting Off Even After I Turn It On?

There could be several reasons why a Keurig coffee maker keeps shutting off even after turning it on.

  1. One of the most common causes is that the K-Cup hasn’t been properly punctured by the needle in the K-Cup basket. If this happens, the machine can shut off while brewing.
  2. In addition, a broken or clogged needle, an overdue cleaning, or a misaligned magnet can also be the culprit. Another potential issue is static electricity build-up if the air is particularly dry.
  3. Another reason could be a faulty outlet or power cable, as the Keurig won’t turn on without power. The water magnet alignment could also be off, resulting in the machine shutting down during brewing.
  4. Lastly, if the Keurig is overheating, it may automatically shut off to prevent damage.

What Are Some Of The Most Common Keurig Problems And How To Tackle Them?

What Are Some Of The Most Common Keurig Problems And How To Tackle Them

1. Water flow issues

One of the most common issues with Keurig machines is problems with water flow. If the machine is not dispensing water or is not making a full cup, it’s likely a clogged Keurig. The solution is to clean the entrance and exit needles and run a few water-only brew cycles.

2. Too much water

If your Keurig machine dispenses too much water, consider changing the water, as your tap water may contain hard water buildup.

3. Machine won’t switch on

If your Keurig won’t switch on, check if it’s plugged in and verify if other appliances work in the same outlet. If they don’t, it could be an electrical issue.

4. Not heating water

If the Keurig is not heating water, check if it’s turned on and wait for the heating light to appear. If it doesn’t, try unplugging and plugging the machine back in.

5. Stuck in preheating mode

If your Keurig is stuck in preheating mode, unplug the machine, wait a few minutes, and plug it back in.

6. Cold coffee

If your Keurig makes cold coffee, it’s likely due to scale and debris buildup in the line. Try descaling the machine with vinegar and water solution.

How To Turn On Keurig Without Power Button?

If someone has trouble turning on their Keurig without a power button, there are a few options. One option is holding down the brewer’s power button for 10 seconds. The person can flip the power switch if the brewer has no power button.

If the Keurig is a Plus or 2.0 model with a touchscreen, the power button will be located in the bottom right corner of the screen. If the power button is not visible, the person can try unplugging and plugging in the brewer again. Another option is to lift the handle if it’s a K-Slim model. Finally, if all else fails, the person can pull the plug to reset the brewer. With these simple steps, Keurig should be up and running again in no time.

How to Descale The Keurig?

How to Descale The Keurig

Step 1: Gather Your Supplies

The first step in descaling your Keurig is to gather your supplies. You’ll need white vinegar, water, a large mug, and a clean cloth or sponge. You may also want to have a toothbrush on hand to help you clean hard-to-reach areas.

Step 2: Empty The Water Reservoir

Before you can begin descaling your Keurig, empty the water reservoir. Start by unplugging your machine and removing the water reservoir. Dump out any remaining water and rinse the reservoir with clean water.

Step 3: Mix Your Cleaning Solution

Once your water reservoir is empty, it’s time to mix your cleaning solution. Mix equal parts white vinegar and water in a measuring cup or bowl. The amount you need will depend on the size of your Keurig, but a good rule of thumb is to use at least 8 ounces of each.

Step 4: Fill The Water Reservoir

Now that you have your cleaning solution, it’s time to fill the reservoir. Pour the solution into the reservoir until it’s about halfway full. Then, fill the rest of the reservoir with clean water.

Step 5: Run The Cleaning Cycle

Once your water reservoir is filled with the cleaning solution, it’s time to run the cleaning cycle. Place a large mug on the drip tray and turn on your Keurig. Select the largest brew size and allow the machine to run until the mug is full. Dump the mug’s contents and repeat this process until the water reservoir is empty.

Step 6: Rinse The Machine

After you’ve completed the cleaning cycle, it’s important to rinse your machine thoroughly. Fill the water reservoir with clean water and run several more brew cycles until the water reservoir is empty. This will help to remove any remaining vinegar residue from your machine.

Step 7: Clean The Exterior

Finally, it’s time to clean the exterior of your Keurig. Use a clean cloth or sponge to wipe down the machine, paying special attention to any areas with buildup or residue. You can also use a toothbrush to clean any hard-to-reach areas.

How to Clean a Keurig?

Step 1: Unplug your Keurig

Before you start cleaning your Keurig, unplug the machine and let it cool down. You don’t want to risk burning or damaging the machine by cleaning it when it’s hot.

Step 2: Disassemble and Wash the Removable Parts

The first step is to remove all the removable parts of your Keurig machine. This includes the water reservoir, drip tray, and K-cup holder. Wash all these parts thoroughly with soap and warm water, removing any coffee grounds or debris that may have accumulated.

Step 3: Descale the Machine

The next step is to descale your Keurig machine. Descaling involves removing the mineral deposits that build up in the machine over time. These deposits can clog the machine, affect the taste of your coffee, and even cause it to break down. To descale your Keurig, you’ll need white vinegar, water, and a clean cloth.

Fill the water reservoir with a mixture of equal parts white vinegar and water. Place a large mug or bowl on the drip tray, and run the machine without a K-cup until the reservoir is empty. Repeat this process a few times until the water that comes out of the machine is clear of vinegar.

Once you’ve descaled the machine, run a few cycles of clean water through it to remove any remaining vinegar residue. This will ensure your coffee doesn’t taste like vinegar the next time you brew it.

Step 4: Clean the Needle

The needle that punctures the K-cup can become clogged with coffee grounds or debris. This can affect the water flow through the machine and cause it to break down. To clean the needle, use a paper clip or a needle to remove any debris that may have accumulated.

Step 5: Wipe Down the Exterior

Finally, wipe down the machine’s exterior with a damp cloth to remove any dirt or grime that may have accumulated. Make sure to dry the machine thoroughly before plugging it back in and using it.

Regular cleaning of your Keurig machine is essential to ensure it operates efficiently and produces great-tasting coffee. By following these simple steps, you can keep your Keurig machine clean and in good working order for years.

My Keurig Won’t Turn On – FAQs

Can A Power Surge Affect The Functioning Of My Keurig?

Can A Power Surge Affect The Functioning Of My Keurig?

The answer is yes, it’s possible. A power surge can cause damage to the electrical components of your Keurig, leading to malfunctioning or complete failure. However, it’s worth noting that power companies are only liable for damage caused by their negligence, which may include power surges.

Ensuring your Keurig is plugged into a surge protector and properly rated for the wattage is essential to avoid this issue. Additionally, it’s essential to be cautious regarding electrical hazards, as they can cause potential injury and damage to your brewer.

What Is The Potential Cost Of Repairing A Non-Functioning Keurig?

If someone’s Keurig coffee maker is having issues, they may wonder the potential cost of repairing it. On average, a repair service for a Keurig coffee maker can cost anywhere from $50 to $150. However, this cost can be avoided if the machine is still under warranty.

Once the warranty expires, the coffee maker’s repair or replacement costs can be costly. It’s important to note that several common problems with Keurig coffee makers can be easily fixed, such as a clogged water tank or needles, or air in the lines. If someone is experiencing issues with their Keurig Frother, it is important to troubleshoot the problem. If the machine cannot be repaired, someone may need to weigh the costs of repairing versus replacing the machine in the long run.

How Important Is Cleaning The Hose/Valve At The Bottom Of The Tank And On The Keurig  Machine Where The Tank Enters?

Cleaning the hose/valve at the bottom of the tank and on the Keurig machine where the tank enters is crucial for the machine’s functionality. It may seem like a small task, but neglecting it can cause problems such as clogging, slow water flow, leaks, and poor taste in coffee. Cleaning these parts ensures that the water can flow smoothly and is free of debris, preventing clogs and leaks. It also improves the taste of the coffee by ensuring that water is not contaminated with any impurities.

Can Dust Accumulation Affect The Performance Of My Keurig Machine?

Dust is made up of tiny particles of various materials, such as dirt, dead skin cells, and pollen. These particles can be carried by air and land on surfaces, including your Keurig machine. Over time, the dust can accumulate and form a layer that can affect the machine’s performance.

One of the most common ways dust can affect your Keurig machine is clogging the water lines. The water used to make your coffee travels through a series of tubes and pipes within the machine. If dust particles are present in the water, they can accumulate in these tubes and pipes and eventually clog them. This can lead to slow water flow, affecting the taste and quality of your coffee.

In addition, dust can also clog the machine’s air vents. These vents allow air to circulate through the machine and keep it cool. If these vents become clogged, the machine can overheat, leading to damage and reduced performance.

Dust can also affect the machine’s sensors and buttons. If dust particles get into the buttons or sensors, they can interfere with their function. This can make it difficult to operate the machine or cause it to malfunction.


If you find yourself in a situation where Keurig won’t turn on, don’t panic. Take a deep breath and check the basics, such as the power source and connections. From there, move on to more advanced troubleshooting techniques or consider reaching out to Keurig customer support for further assistance.

Remember, a Keurig coffee maker is a valuable addition to any home or office, and with a little patience and persistence, you can get your machine running smoothly once again. Don’t let a minor issue like a machine not turning on get in the way of enjoying your favorite hot beverages. Take the necessary steps to resolve the issue and return to brewing your favorite coffee, tea, or hot cocoa.


Leave a Comment